问题题干答案解析相关问题热门问题最新问题

问题详情

The starting air entering the cylinder begins when the piston（）

A、has nearly come to the TDC

B、has just past the TDC

C、has nearly come to the BDC

D、has just past the BDC

时间：2022-01-04 04:44 关键词：船舶电气与船舶安全

答案解析

相关问题

第二组Under normal operation, some lubrication oil mist may be discharged from the air compressor to the air start system. This oil may be from excess compressor cylinder lubrication, from faulty oil scraper rings, or may even be suspended oil vapor contaminating the engine room atmosphere and drawn in at the compressor suction. Oil discharge is kept to a minimum by draining the after cooler, air receiver and starting system. If small quantities of lubrication oil do get passed into the starting air system, they will deposit as thin moist film over internal pipe surfaces but are not readily combustible. If a cylinder non-return valve leak while the engine is in operation, some hot gas, possibly with unburned fuel and cylinder lubrication oil, may be blown through the valve to the adjacent air manifold. With further heating from the leaky valve, this, together with the already deposited oil film, will carbonize and form. incandescent carbon. If starting air is applied to the system while still hot, the high pressure air coming into contact with the burning carbon may cause an explosion. Such an explosion will cause a flame to pass back through the air start pipe system, evaporating the deposited oil film and igniting it in the presence of air. Very high velocities and shockwaves are generated which may rupture pipes and fittings.Alternatively, if excessive oil has entered the air start system, a mixture of air and oil droplets may be discharged through the open cylinder non-return valve during starting. This spray may ignite due to high temperatures in the cylinder, causing a flame through the still open valve to the air manifold.To prevent an explosion, air start valves must be correctly maintained and lubricated to ensure correct timing and free movement with positive closing. Oil in the system must be kept to a minimum, pipe lines must be drained and cleaned internally when necessary and oil discharge from air compressors must be kept to a minimum by good maintenance.The passage is mainly about
Diesel engines are started by supplying （） into the cylinders in the appropriate sequence for the required direction.
Diesel engines are started by supplying （） into the cylinders in the appropriate sequence for the required direction.
If a four-stroke/cycle diesel engine is started by injecting air into the cylinder, the pistons receiving the charge of starting air must be（）
The forced draught fan should be started and air passed through the furnace for several minutes to “（）” it of any exhaust gas or oil vapors.